R

ReportWalk for Home Inspectors

Stop typing.
Start reporting.

You're a home inspector, not a copywriter. Walk the site, speak what you see, snap photos — ReportWalk turns it into a professional report in minutes.

Sound Familiar?

1

Spending 2-3 hours writing up a report after every 2-3 hour inspection — a 1:1 ratio of work to paperwork

2

Taking 200+ photos per inspection and manually organizing them into report sections

3

Clients and agents calling for the report before you've even left the property

4

Using clunky inspection software that was designed in 2010 and feels like it

What Your Report Looks Like

Real findings, generated by AI

You speak it. ReportWalk writes it — with proper terminology, clear structure, and photo references. Here's what a home inspector report actually looks like:

Roof: Architectural shingles, estimated 15-18 years old, showing granule loss and curling on south-facing slope — recommend budgeting for replacement within 3-5 years

Foundation: Horizontal crack in east basement wall approximately 8 feet long — consistent with lateral soil pressure, recommend structural engineer evaluation

Attic insulation: Blown-in fiberglass, approximately R-19 — below current code minimum of R-38 for this climate zone

Kitchen GFCI protection missing on countertop receptacles within 6 feet of sink — safety upgrade recommended

Garage: Firewall penetration at utility line entry not properly sealed — fire separation compromised

These are real examples of AI-generated findings from voice input. Your reports will use your words and your observations.

What You Can Generate

Full Home Inspection Report

Comprehensive property evaluation covering structure, systems, interior, exterior, and safety — the standard pre-purchase report.

See full report breakdown →

Sections Covered

  1. 01Roof & exterior cladding
  2. 02Structure & foundation
  3. 03Electrical systems
  4. 04Plumbing systems
  5. 05HVAC systems
  6. 06Interior rooms & finishes
  7. 07Attic, insulation & ventilation
  8. 08Garage & site drainage

Pre-Listing Inspection Report

Seller-side inspection to identify issues before listing, helping avoid surprises during buyer inspections.

See full report breakdown →

Sections Covered

  1. 01Major system overview
  2. 02Safety concerns & code issues
  3. 03Deferred maintenance items
  4. 04Cosmetic vs structural issues
  5. 05Recommended repairs before listing
  6. 06Estimated repair costs
  7. 07Summary of property condition

How It Works

01

Walk the site

Do your home inspector work as usual. Take photos of what you find — panels, equipment, conditions, defects. ReportWalk stays out of your way.

02

Speak your findings

Tap record and describe what you see in plain language. No forms, no checkboxes, no typing on a tiny screen with dirty hands. Just talk like you'd explain it to a colleague.

03

Get your report

ReportWalk's AI organizes your voice notes and photos into a structured, professional report. Proper terminology, logical sections, photo references — all in minutes, not hours.

Try it free

Your first report
is on us

Download ReportWalk, walk your next job site, and see the difference. No credit card. No commitment. Just faster reports.

Download on the App Store